Your Cart is Empty
We are OPEN AND DELIVERING! Live chat available 9am-1pm and 2pm-4.45pm (sometimes longer). Tel 01492 535 852
We are OPEN AND DELIVERING! Live chat available 9am-1pm and 2pm-4.45pm (sometimes longer). Tel 01492 535 852
This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas).
This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas)
This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations).
This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations)
Material: Steel with a cast-iron door
Output: 5kW
(max approx: 6.2kW)
Material: Steel with a cast-iron door
Output: 5kW
(max approx: 6.2kW)
Body
Width: 541mm
Height: 600mm
Depth: 365mm
Flue
5" (125mm)
Body
Width: 453mm
Height: 617mm
Depth: 404mm
Flue
5" (125mm)
Made in the UK
Lifetime Body Guarantee
Patented Flexifuel System
Large fire viewing window
Made in the UK
Lifetime Body Guarantee
Patented Flexifuel Systeml
Excellent stove from a British manufacturer.
Excellent stove from a British manufacturer.
Free lifetime guarantee on Aarrow stoves which is super amazing. This is Aarrow's flagship 5kW multifuel stove (a best-seller for many stove shops for many years). All Aarrow stoves are manufactured in the UK at Arada's South West based state of the art production facility.
Arada is one of the UK's largest stove companies selling over 20,000 stoves a year.
An optional rear heatshield is available allowing the stove to be as close as 50mm to a combustible surface (assuming suitable twin wall flue used). See "Customers Also Bought".
"The stove has been fitted for 2 weeks now and it has transformed our Living room, with the wider window/door, it creates a great atmosphere and almost mesmerizing to watch (the TV is hardly on these days. The stove is very simple to use and gives off plenty of heat whilst the very efficient backwash system keeps the viewing window nice and clean. The shaker and Ash tray make it easy to clean and less like a chore." Review by M Baker
Multifuel
Nominal 5kW. Max. 6.2kW
This stove will run happily at 5kW - 6.2kW depending on fuel load. Note that running the stove at a higher fuel level than that specified in the manufacturer's manual may cause degradation of stove innards (firebricks, baffle etc.) although these are replaceable (and repairable with beige fire cement).
This stove meets and exceeds the new 2022 Ecodesign regulations
This stove is approved by DEFRA to burn wood in a Smoke Control Area
79.8% (as a rough guide 79.8% of heat goes to the room with 20.2% going up the chimney).
Don't overthink efficiency. 75%-85% is fine and90%+ efficiency may not work so well on shorter or difficult chimneys.
Yes, this stove can be fitted with an external air kit (draws air from outside via pipe direct to stove). Usually this option is not relevant unless a room air-vent is required and the property is airtight (by design or choice).
See "Customers Also Bought".
Steel stove (Lifetime body guarantee) with cast-iron door
What to buy steel or cast-iron? Do not overthink. Steel heats fast. Cast-iron takes a little longer but retains heat longer as fire dies.
Hearth thickness: minimum 12mm non-combustible material (can include floor thickness).
Hamlet and Arada stoves are made in the same UK factory and we are often asked about the differences:
Height: 617mm
Width: 453mm
Depth: 404mm
Front of pipe to rear of stove: 209mm
Flue outlet: 5" (125mm)
Which fitting pack for my liner? A fitting pack includes all you need except liner and chimney closure plate (also sometimes known as register plate)? Advice here
Viewing area (from outside stove looking in)
Width: 261mm
Height: 275mm
5" (125mm) collar top or rear (can be installed with a 5" or 6" chimney liner)
Top or rear connection
Distance to combustibles SIDE: 550mm
Distance to combustibles REAR: 700mm
To non-combustibles there are no hard rules but, around the stove, a 50mm minimum air gap is recommended to brick/stone. This to be increased to 100mm for rendered or boarded surfaces. Prior to purchasing any stove download the installation manual to check that manufacturers do not have any additional requirements.
Max log length: 300mm
We offer 14 days from delivery to report any courier damage to your stove. If a stove is damaged by the courier we will replace or refund as desired.
The manufacturer offers a lifetime body guarantee
Why do we sell glass insurance (pre-ticked box close to ADD TO CART button)? Because glass is classed, in the stoves industry, as a consumable item and not covered under ANY guarantee by any manufacture for any reason whatsoever. If it breaks or cracks on day one or day twenty it is not covered. If the inside of the glass goes cloudy or gets any kind of surface coating or etching then it is not covered (it will be to do with what you are burning according to manufacturers and glass makers). Glass usually costs £30-£60 plus postage but can be more on higher end models.
Defra-approved or/and Ecodesign stoves are designed and thoroughly tested before being allowed onto the market and every stove sold is identical. In the rare event a stove does not perform as well as expected it is always down to the installation, the chimney or circumstances unique to the property (pressure imbalances caused by local conditions, down drafts etc.). Here at Stovefitter's we have taken stoves back on a number of occasions for testing on our chimney and in every situation the stoves performed as expected (we may of course find a faulty stove one day but never as yet). We may, at our discretion, take a stove back once it has been used and in this situation a 50% refund would be provided (stove would be sold as second hand). We would, however, offer a 33% refund on a replacement stove.
Already have a chimney? You need 1. Stove 2. Liner 3. Fitting Pack 4. Chimney closure plate (Hardiebacker board from Builder's merchants or galvanised sheet).That's it!
No chimney? Check out our shed kits or let us design your clip-together chimney design - easy peasy.
Stovefitter's Warehouse is owned and managed by Julian Patrick, blogger and author of The Stove Fitter's Manual. Julian was previously a full-time installer of wood-burning stoves (including solid fuel heating systems). He laid down the tools in 2013 to write his stove manual and open a small shop in North Wales (the Wood Stove Hut, soon to grow into The Stovefitter's Warehouse).
Ecoburn (S3) Stove User Guide (BK740-r1)