This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas).
This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas)
This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations).
This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations)
Material: Steel with a cast-iron door
Output: 4.9kW
(max approx: 7kW)
Material: Steel with a cast-iron door
Output: 4.9kW
(max approx: 7kW)
Body
Width: 416mm
Height: 560mm
Depth: 373mm
Flue
5" (125mm)
Body
Width: 416mm
Height: 560mm
Depth: 373mm
Flue
5" (125mm)
Made in the UK
Premium Product
Single air control
Large glass
Made in the UK
10-year guarantee
Single air control
Large glass
Charnwood's stoves are very nice indeed and you can't go wrong with this brand.
You might also like: DG Ivar 5, Heta Inspire 45
Charnwood's stoves are very nice indeed and you really can't go wrong with this brand.
You might also like: DG Ivar 5, Heta Inspire 45
Larger version of the C4.
This page is currently archived and may not be up to date and dimensions/information/facts may not be correct.
Standard leg (colour "gunmetal" shown)
Store stand (colour "black" shown)
Not one for following the crowd and choosing a black stove? Charnwood offer a variety of other colours. Please contact us for a quote and delivery estimate.
Note that coloured stoves are made to order and can take a few weeks (longer in peak season).
Charnwood offers a useful rear adaptor for this stove allowing the flue to be connected further back on the stove. The flue can still be swept thorough the stove with this adaptor.
A rear heat shield is another useful option. Distance to combustibles at the rear of the stove is usually 350mm but is reduced to 100mm with the shield.
See "Customers Also Bought".
Wood-only (can only burn wood)
Nominal 4.9kW. Max. 7kW
This stove will run happily at 5kW - 7kW depending on fuel load. Note that running the stove at a higher fuel level than that specified in the manufacturer's manual may cause degradation of stove innards (firebricks, baffle etc.) although these are replaceable (and repairable with beige fire cement).
This stove meets and exceeds the new 2022 Ecodesign regulations
This stove is approved by DEFRA to burn wood in a Smoke Control Area
82% (as a rough guide 82% of heat goes to the room with 18% going up the chimney).
Don't overthink efficiency. 75%-85% is fine and90%+ efficiency may not work so well on shorter or difficult chimneys.
Yes, this stove can be fitted with an external air kit (draws air from outside via pipe direct to stove). Usually this option is not relevant unless a room air-vent is required and the property is airtight (by design or choice).
See "Customers Also Bought".
Steel stove (10-year body guarantee) with cast-iron door
What to buy steel or cast-iron? Do not overthink. Steel heats fast. Cast-iron takes a little longer but retains heat longer as fire dies.
Hearth thickness: minimum 12mm non-combustible material (can include floor thickness).
Height: 560mm
Width: 416mm
Depth: 373mm
Front of pipe to rear of stove: 194mm
Flue outlet: 5" (125mm)
Which fitting pack for my liner? A fitting pack includes all you need except liner and chimney closure plate (also sometimes known as register plate)? Advice here
Viewing area (from outside stove looking in)
Width: 265mm
Height: 265mm
5" (125mm) collar top or rear (can be installed with a 5" or 6" chimney liner)
Top or rear connection
Distance to combustibles SIDE: 600mm
Distance to combustibles REAR: 700mm
To non-combustibles there are no hard rules but, around the stove, a 50mm minimum air gap is recommended to brick/stone. This to be increased to 100mm for rendered or boarded surfaces. Prior to purchasing any stove download the installation manual to check that manufacturers do not have any additional requirements.
Maximum log length: 255mm
We offer 14 days from delivery to report any courier damage to your stove. If a stove is damaged by the courier we will replace or refund as desired.
Already have a chimney? You need 1. Stove 2. Liner 3. Fitting Pack 4. Chimney closure plate (Hardiebacker board from Builder's merchants or galvanised sheet).That's it!
No chimney? Check out our shed kits or let us design your clip-together chimney design - easy peasy.
Stovefitter's Warehouse is owned and managed by Julian Patrick, blogger and author of The Stove Fitter's Manual. Julian was previously a full-time installer of wood-burning stoves (including solid fuel heating systems). He laid down the tools in 2013 to write his stove manual and open a small shop in North Wales (the Wood Stove Hut, soon to grow into The Stovefitter's Warehouse).
