FITTING PACK: 4" to 5" with 500mm black pipe

The Stovefitter's Fitting Pack

Fitting packs contain a chimney cowl PLUS everything you need to get from your stove (A) to your flue liner (B) with the exception of your closure plate (*). For a closure plate we recommend a sheet of Hardibacker 12mm board (available at many good DIY stores. 

• 5" 500mm black (vitreous) pipe
• 4" to 5" adaptor (fits to the stove collar)
• Snub nose adaptor (connects liner to black pipe)
• Pot hanging cowl (connects liner to chimney pot)
• Data plate (informational, a requirement of building regulations)
• 9" square sealing plate (to cosmetically seal vitreous pipe to closure plate)
• Nose cone (to drag liner down chimney)
• Fire cement (sealing joins and fire brick cracks)
• Useful items (a magic pack of goodies to help in all manner of ways, scroll further down for specifics)

        Choose between two cowls:

        Standard: All round mid-weight stainless steel cowl. Excellent price point (cowl retails at £79)

        Duraflue: "Fit and Forget" Premium: Excellent heavy-weight 316 grade stainless steel cowl with a 15-year guarantee. No external spot welds (nuts and bolts). Our cowl of choice (retails at £99)

        Useful items kit:

        • 4x long screws with six-sided head: used to attach adaptor-sealing-plate-combi (9” square) to your chimney closure plate (drill 4 pilot holes in closure plate first)
        • Magnetic nut-setter x1: for long screws above
        • 10x small self tappers: used to strengthen the joint between two pieces of vitreous pipe (two per joint, one either side of pipe) and to secure the liner to the adaptor-sealing-plate-combi
        • 1x high-strength drill bit 3mm for pilot holes
        • 1m length fireproof sticky-back webbing: Can be used on stub nose adaptor where it goes into vitreous pipe (makes it a tight rather than loose fit, two thicknesses may be required). Webbing can also be used where bottom end of vitreous enters stove (depends on stove whether it is required or desired). You can use instead of fire cement if a snug fit.

        Installation Infographic

          Customer Reviews

          Based on 158 reviews
          DG Ivar 5 and FP1 500mm 5” pipe & 904 silvacore liner

          Delivered quickly, all kit supplied that was requested. Delivery company couldn’t deliver initially as they had not specifically stated that someone had to be in to sign for delivery and stovefitters kindly organised re delivery at their own cost although this was no fault of their own.
          Slightly squashed end of duraflue but the sales team were very good at answering my questions concerning whether this would effect the function. Made the cowl difficult to get on though. Self fitted thanks to the manual. Wouldn’t say they were brilliant - mainly because all the information on the guide is - and the delivery was prompt and everything worked excellenty so I didn’t need to speak to them much !!
          Would recommend.

          DG Ivar 5kw and Silvacore 904 liner

          Ordered stove and liner with FP1 fitting kit,spoke to a few members of staff and all were very helpful and knowledgable,I ordered all the kit through the stove fitters warehouse,everything turned up on time and was really impressed with the quality of the materials supplied.
          Being an ex gas safe registered engineer I decided to fit stove and liner myself with the help of all the valuable information on the stovefitters website,the fitting of stove and liner is well within the capabilities of any average diy'er with all the info thinking of fitting a second stove and would definitely use the stove fitters warehouse/ manual again.
          I didn't experience any problems with my local council (Pembrokeshire) in relation to building controls,they were really helpful.
          Thanks again to all staff,
          You'll probably hear from me again when I order second stove
          Mark Cook (West wales)

          FPB 2fitting pack excellent

          Purchased all products for our new chimney and a fitting pack excellent service and value thank you stovefitters

          Saltfire st-x5

          It is quite clearly a first class product which was a dream to fit. As a spark and In the trade self fitting was the way to go. The support from the team In The office was superb And any problem areas expertly explained and solved. The stove is excellent and value for money is second to none. All the additional parts were of first grade standard and all fitted like a dream. My one constructive criticism would be a buy back service for unused main parts ie the 50cm pipe as the fitting did t require it’s use in the end. I would suggest I saved In the region of £1700 but utilising the Stove fitters warehouse. Many thanks and I have already passed the details to colleagues who have placed orders and followed the on-line tutorials. Many thanks from

          Silvacore liner and fitting pack

          One word summary, perfect!
          Liner was brilliant, solid yet flexible enough to be passed down chimney without too much bother. All other accessories; fire rope, cement, self tappers, vitreous pipe and cowl were great and meant no extra trips to local DIY shop.
          Can't recommend this website and products highly enough!

          Verified Reviews