FITTING PACK: 5" to 6" with 1000mm black pipe

FITTING PACK: 5" to 6" with 1000mm black pipe

£226.48 £238.40 You Save 5% (£11.92)

The Stovefitter's Fitting Pack

Fitting packs contain a chimney cowl PLUS everything you need to get from your stove (A) to your flue liner (B) with the exception of your closure plate (*). For a closure plate we recommend a sheet of Hardibacker 12mm board (available at many good DIY stores.

• 5" 1000mm black (vitreous) pipe

• 5" to 6" Snub nose adaptor (connects liner to black pipe)

• Pot hanging cowl (connects liner to chimney pot)

• Data plate (informational, a requirement of building regulations)

• 9" square sealing plate (to cosmetically seal vitreous pipe to closure plate)

• Nose cone (to drag liner down chimney)

• Fire cement (sealing joins and fire brick cracks)

• Useful items (a magic pack of goodies to help in all manner of ways, scroll further down for specifics)

Choose between two cowls:

Standard: All round mid-weight stainless steel cowl. Excellent price point (cowl retails at £79)

Duraflue: "Fit and Forget" Premium: Excellent heavy-weight 316 grade stainless steel cowl with a 15-year guarantee. No external spot welds (nuts and bolts). Our cowl of choice (retails at £99)

Useful items kit:

• 4x long screws with six-sided head: used to attach adaptor-sealing-plate-combi (9” square) to your chimney closure plate (drill 4 pilot holes in closure plate first)

• Magnetic nut-setter x1: for long screws above

• 10x small self tappers: used to strengthen the joint between two pieces of vitreous pipe (two per joint, one either side of pipe) and to secure the liner to the adaptor-sealing-plate-combi

• 1x high-strength drill bit 3mm for pilot holes

• 1m length fireproof sticky-back webbing: Can be used on stub nose adaptor where it goes into vitreous pipe (makes it a tight rather than loose fit, two thicknesses may be required). Webbing can also be used where bottom end of vitreous enters stove (depends on stove whether it is required or desired). You can use instead of fire cement if a snug fit.

Installation Infographic

FITTING PACK: 5" to 5" with 500mm black pipe

Not quite as competent as they are willing

Parcelforce 48 took 8 days to deliver, not the suppliers fault but......why use them? No doubt a familiar complaint and given that, one might have thought they would have known the routine. A little slow to get up to speed to begin with when I queried the delay but thereafter very helpful but out of their control. Left(hidden) by Parcelforce “in garage” which was in fact a shed in garden. Remained unaware of delivery until advised by email. Tracking is just salt in the wound. But apart from that..........life’s too short.

Parkray Aspect 4 compact

This stove has a simple, clean design with a big window for its size. It's solidly constructed with a great finish. The stove burns brilliantly and we are very pleased with it.

Fitting kit for Saltfire ST4

The kit contained all the pieces required for the installation and everything seems to be good quality.

Dg ivar 5

Best stove I have had ! If your looking for 5kw stove you won’t find better . Edwin Dickinson

1 2 3

FITTING PACK: 5" to 6" with 1000mm black pipe

The Stovefitter's Fitting Pack

Choose between two cowls:

Useful items kit:

Installation Infographic

Customer Reviews