HAPPY NEW YEAR! WE ARE OPEN AND DELIVERING AS USUAL. live chat available 9am-1pm and 2pm-4.45pm (sometimes longer).

00

Your Cart is Empty

Hamlet Hardy 4 Wood Burning Stove 4kW 33 x 46cm

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

DEFRA Approved

This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas).

Eco Design 2022

This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations).

Ecodesign & myths about pollution

MATERIAL & Output

Material: Steel (10-year guarantee)

Output: 4.2kW
(max approx: 5kW)

Material & Output

Material: Steel (10-year guarantee)

Output: 4.2kW
(max approx: 5kW)

DImensions

Body
Width: 330mm
Height: 458mm
Depth: 323mm

Flue
4" (100mm)

Dimensions

Body
Width: 330mm
Height: 458mm
Depth: 323mm

Flue
4" (100mm)

KEY SELLING POINTS

Made in the UK

Good value

Installers like them

 

Key Selling Points

 

Made in the UK

Good value

Heavy and solid

Julian's Thoughts

Very solid and very British (Devon). The Hamlet is one of our top selling stove ranges. Ten year guarantee on the stove body shows how confident the brand is in its quality.

Widescreen version also available

Julian's Thoughts

Very solid and very British (Devon). The Hamlet is one of our top selling stove ranges. Ten-year guarantee on the stove body shows how confident the brand is in its quality.

Description

About the Hamlet Hardy 4 Multifuel Stove

This is the smallest stove in the very popular UK-manufactured (Devon) Hamlet range and a worthy competitor to the Hobbit small stove.

The stove is multifuel as standard and is perfectly happy burning wood on its own or smokeless fuel.

An excellent ten-year guarantee on the stove body provides reassurance.

Other models in the range include the Hamlet Solution 5 and Solution 5 Widescreen.

Specifications

Output & Fuel

Wood or Multifuel
Nominal 4.2kW

This stove will run happily at 5kW depending on fuel load. Note that running the stove at a higher fuel level than that specified in the manufacturer's manual may cause degradation of stove innards (firebricks, baffle etc.) although these are replaceable (and repairable with beige fire cement).

This stove can burn wood and smokeless fuel/coal without any modification.

What size stove do I need?


Eco Credentials


Efficiency

81.1% (as a rough guide 81.1% of heat goes to the room with 18.9% going up the chimney).

Don't overthink efficiency. 75%-85% is fine and90%+ efficiency may not work so well on shorter or difficult chimneys.


External Air

No, this stove cannot be fitted with an external air kit (draws air from outside via pipe direct to stove). Usually this option is not relevant unless a room air-vent is required and the property is airtight (by design or choice).

Air vent advice here


Body & Door

Steel stove (10-year body guarantee) with steel door

What to buy steel or cast-iron? Do not overthink. Steel heats fast. Cast-iron takes a little longer but retains heat longer as fire dies.


Hearth

This stove cannot be sited on a 12mm thick hearth. A full 125mm thickness constructional hearth is required.

Hearth regulation advice here

Dimensions

Dimensions

Height: 458mm
Width: 330mm
Depth: 323mm
Front of pipe to rear of stove: 144mm

Flue outlet: 4" (100mm)

Which fitting pack for my liner? A fitting pack includes all you need except liner and chimney closure plate (also sometimes known as register plate)? Advice here


Glass

Viewing area (from outside stove looking in)

Width: 145mm
Height: 165mm


Flue

4" (100mm) collar top or rear (must be installed with a 6" chimney liner)

Top or rear connection


Air Gaps

Distance to combustibles SIDE: 500mm
Distance to combustibles REAR: 650mm

Tech document sheet

To non-combustibles there are no hard rules but, around the stove, a 50mm minimum air gap is recommended to brick/stone. This to be increased to 100mm for rendered or boarded surfaces. Prior to purchasing any stove download the installation manual to check that manufacturers do not have any additional requirements.

Distances & heat shield advice


Log Length

Maximum Log Length: 200mm

Delivery Promise

We offer 14 days from delivery to report any courier damage to your stove. If a stove is damaged by the courier we will replace or refund as desired.

Already have a chimney? You need 1. Stove 2. Liner 3. Fitting Pack 4. Chimney closure plate (Hardiebacker board from Builder's merchants or galvanised sheet).That's it!
No chimney? Check out our shed kits or let us design your clip-together chimney design - easy peasy.

Stovefitter's Warehouse is owned and managed by Julian Patrick, blogger and author of The Stove Fitter's Manual. Julian was previously a full-time installer of wood-burning stoves (including solid fuel heating systems). He laid down the tools in 2013 to write his stove manual and open a small shop in North Wales (the Wood Stove Hut, soon to grow into The Stovefitter's Warehouse).

More info about the company and Julian's team here