£759.00 (including VAT)
Replacing the Hamlet 5 SC this is the very latest version (Series 4) of the UK-manufactured (Devon) and very popular Hamlet Solution 5
This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas).
This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas)
This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations).
This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations)
Material: Steel with a cast-iron door
Output: 5kW
(max approx: 6.65kW)
Material: Steel with a cast-iron door
Output: 5kW
(max approx: 6.65kW)
Body
Width: 436mm
Height: 550mm
Depth: 387mm
Flue
5" (125mm)
Body
Width: 436mm
Height: 550mm
Depth: 387mm
Flue
5" (125mm)
Made in the UK
Good value
Installers like them
Made in the UK
Good value
Installers like them
Very solid and very British (Devon). The Hamlet is one of our top selling stove ranges. Ten year guarantee on the stove body shows how confident the brand is in its quality.
Very solid and very British (Devon). The Hamlet is one of our top selling stove ranges. Ten-year guarantee on the stove body shows how confident the brand is in its quality.
Replacing the Hamlet 5 SC this is the very latest version (Series 4) of the UK-manufactured (Devon) and very popular Hamlet Solution 5 with full SIA Ecodesign credentials and DEFRA-Approved to burn wood in a smoke control area (most cities and built-up areas).
The stove is multifuel as standard and is perfectly happy burning wood on its own or smokeless fuel.
A rear heatshield is available (see "Customer's Also Bought" on this page) allowing the stove to be placed closer to combustible materials.
An excellent ten-year guarantee on the stove body provides reassurance.
Other models in the range include the Solution 5 Compact and Solution 5 Widescreen.
Multifuel (can burn wood and smokeless fuel)
Nominal 5kW. Max. 6.65kW
This stove will run happily at 5kW depending on fuel load. Note that running the stove at a higher fuel level than that specified in the manufacturer's manual may cause degradation of stove innards (firebricks, baffle etc.) although these are replaceable (and repairable with beige fire cement).
This stove can burn wood and smokeless fuel/coal without any modification.
This stove meets and exceeds the new 2022 Ecodesign regulations
This stove is approved by DEFRA to burn wood in a Smoke Control Area
80.6% (as a rough guide 80.6% of heat goes to the room with 19.4% going up the chimney).
Don't overthink efficiency. 75%-85% is fine and 90%+ efficiency may not work so well on shorter or difficult chimneys.
Yes, this stove can be fitted with an external air kit (draws air from outside via pipe direct to stove). Usually this option is not relevant unless a room air-vent is required and the property is airtight (by design or choice).
See Customer's Also Bought
Steel stove (10-year body guarantee) with cast-iron door
What to buy steel or cast-iron? Do not overthink. Steel heats fast. Cast-iron takes a little longer but retains heat longer as fire dies.
This stove can, if sited outside of a fireplace recess, be sited on a 12mm thick hearth.
If in a fireplace recess, a full 125mm thickness constructional hearth is required. This will usually be in place as part of the recess design.
Height: 550mm
Width: 436mm
Depth: 387mm
Front of pipe to rear of stove: 144mm
Flue outlet: 5" (125mm)
Which fitting pack for my liner? A fitting pack includes all you need except liner and chimney closure plate (also sometimes known as register plate)? Advice here
Viewing area (from outside stove looking in)
Width: 27cm
Height: 26cm
5" (125mm) collar top or rear (can be installed with a 5" or 6" chimney liner)
Top or rear connection
Distance to combustibles SIDE: 550mm
Distance to combustibles REAR: 750mm (500mm with optional rear heat shield; 350mm if twin wall all the way to stove and heat shield).
You can find the optional heat shield in "Customer's Also Bought" on this product page.
To non-combustibles there are no hard rules but, around the stove, a 50mm minimum air gap is recommended to brick/stone. This to be increased to 100mm for rendered or boarded surfaces. Prior to purchasing any stove download the installation manual to check that manufacturers do not have any additional requirements.
Maximum Log Length: 300mm
We offer 14 days from delivery to report any courier damage to your stove. If a stove is damaged by the courier we will replace or refund as desired.
The manufacturer offers a 10 year body guarantee
Why do we sell glass insurance (pre-ticked box close to ADD TO CART button)? Because glass is classed, in the stoves industry, as a consumable item and not covered under ANY guarantee by any manufacture for any reason whatsoever. If it breaks or cracks on day one or day twenty it is not covered. If the inside of the glass goes cloudy or gets any kind of surface coating or etching then it is not covered (it will be to do with what you are burning according to manufacturers and glass makers). Glass usually costs £30-£60 plus postage but can be more on higher end models.
Defra-approved or/and Ecodesign stoves are designed and thoroughly tested before being allowed onto the market and every stove sold is identical. In the rare event a stove does not perform as well as expected it is always down to the installation, the chimney or circumstances unique to the property (pressure imbalances caused by local conditions, down drafts etc.). Here at Stovefitter's we have taken stoves back on a number of occasions for testing on our chimney and in every situation the stoves performed as expected (we may of course find a faulty stove one day but never as yet). We may, at our discretion, take a stove back once it has been used and in this situation a 50% refund would be provided (stove would be sold as second hand). We would, however, offer a 33% refund on a replacement stove.
Already have a chimney? You need 1. Stove 2. Liner 3. Fitting Pack 4. Chimney closure plate (Hardiebacker board from Builder's merchants or galvanised sheet).That's it!
No chimney? Check out our shed kits or let us design your clip-together chimney design - easy peasy.
Stovefitter's Warehouse is owned and managed by Julian Patrick, blogger and author of The Stove Fitter's Manual. Julian was previously a full-time installer of wood-burning stoves (including solid fuel heating systems). He laid down the tools in 2013 to write his stove manual and open a small shop in North Wales (the Wood Stove Hut, soon to grow into The Stovefitter's Warehouse).
Ecoburn (S3) Stove User Guide (BK740-r1)