Henley Dalewood Double Side Wood Burning Stove 6KW

10 items left

The Henley Dalewood Double Sided stove really doubles the wow factor.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
DEFRA Approved Logo

DEFRA Approved

This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas).

Pending DEFRA Approval

Once approved, this stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas)

Eco Design 2022

Eco Design 2022

This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations).

Ecodesign & myths about pollution

Eco Design 2022

This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations)

Ecodesign & myths about pollution

Heat Output

MATERIAL & Output

Material: Cast iron

Output: 5kW
(max approx: 5kW)

Material & Output

Material: Cast iron door, steel body

Output: 6kW
(max approx: 6.5kW)

Stove Dimensions

DImensions

Body
Width: 465mm
Height: 530mm
Depth: 582mm

Flue
5" (125mm)

Dimensions

Body
Width: 465mm
Height: 530mm
Depth: 582mm

Flue
5" (125mm)

Key selling points

KEY SELLING POINTS

Made in Ireland

Cast Iron

Contemporary design

Key Selling Points

Made in Ireland

Cast Iron

Contemporary design

Stovefitters' opinion

Julian's Thoughts

Excellent stove from an Irish manufacturer.

Julian's Thoughts

Excellent stove from an Irish manufacturer.

Description

About the Henley Dalewood Double Sided

We do love a double sided stove and the Henley Dalewood Double Side 6kW ticks all the boxes. Sharp design, super efficient and soon to be Defra approved.

Specifications

Output & Fuel

Wood burning
Nominal 6kW. Max. 6.5kW

This stove will run happily at 5kW depending on fuel load. Note that running the stove at a higher fuel level than that specified in the manufacturer's manual may cause degradation of stove innards (firebricks, baffle etc.) although these are replaceable (and repairable with beige fire cement).

What size stove do I need?


Eco Credentials

This stove meets and exceeds the new 2022 Ecodesign regulations

This stove is pending approval by DEFRA to burn wood in a Smoke Control Area


Efficiency

77.1% (as a rough guide 77.1% of heat goes to the room with 22.9% going up the chimney).

Don't overthink efficiency. 75%-85% is fine and 90%+ efficiency may not work so well on shorter or difficult chimneys.


External Air

Yes, this stove can be fitted with an external air kit (draws air from outside via pipe direct to stove). Usually this option is not relevant unless a room air-vent is required and the property is airtight (by design or choice).

See "Customers Also Bought".

Air vent advice here


Body & Door

Cast iron door

What to buy steel or cast-iron? Do not overthink. Steel heats fast. Cast-iron takes a little longer but retains heat longer as fire dies.


Hearth

Hearth thickness: minimum 12mm non-combustible material (can include floor thickness).

Hearth regulation advice here

Dimensions

Dimensions

Height: 530mm
Width: 465mm
Depth: 582mm

Flue outlet: 5" (125mm)

Which fitting pack for my liner? A fitting pack includes all you need except liner and chimney closure plate (also sometimes known as register plate)? Advice here


Glass

Viewing area (from outside stove looking in)

Width: TBC
Height: TBC


Flue

5" (125mm) collar top or rear (can be installed with a 5" or 6" chimney liner)

Top or rear connection


Air Gaps

Distance to combustibles SIDE: Not supplied by manufactuer
Distance to combustibles REAR: Not supplied by manufactuer

To non-combustibles there are no hard rules but, around the stove, a 50mm minimum air gap is recommended to brick/stone. This to be increased to 100mm for rendered or boarded surfaces. Prior to purchasing any stove download the installation manual to check that manufacturers do not have any additional requirements.

Distances & heat shield advice


Log Length

Max log length: 200mm

Delivery Promise

We offer 14 days from delivery to report any courier damage to your stove. If a stove is damaged by the courier we will replace or refund as desired.

Guarantee

Manufacturer's Guarantee

The manufacturer's guarantee:

5 years. More info here

Glass

Why do we sell glass insurance (pre-ticked box close to ADD TO CART button)? Because glass is classed, in the stoves industry, as a consumable item and not covered under ANY guarantee by any manufacture for any reason whatsoever. If it breaks or cracks on day one or day twenty it is not covered. If the inside of the glass goes cloudy or gets any kind of surface coating or etching then it is not covered (it will be to do with what you are burning according to manufacturers and glass makers). Glass usually costs £30-£60 plus postage but can be more on higher end models.

Performance

Defra-approved or/and Ecodesign stoves are designed and thoroughly tested before being allowed onto the market and every stove sold is identical. In the rare event a stove does not perform as well as expected it is always down to the installation, the chimney or circumstances unique to the property (pressure imbalances caused by local conditions, down drafts etc.). Here at Stovefitter's we have taken stoves back on a number of occasions for testing on our chimney and in every situation the stoves performed as expected (we may of course find a faulty stove one day but never as yet). We may, at our discretion, take a stove back once it has been used and in this situation a 50% refund would be provided (stove would be sold as second hand). We would, however, offer a 33% refund on a replacement stove.

£ PRICE MATCH £

We will happily strive to match any price you may have from any other supplier as long as the other supplier has it in stock.
Offered an "ex-display" or "shop soiled"? We will strive to offer you a new stove for the same price.

Already have a chimney? You need 1. Stove 2. Liner 3. Fitting Pack 4. Chimney closure plate (Hardiebacker board from Builder's merchants or galvanised sheet).That's it!
No chimney? Check out our shed kits or let us design your clip-together chimney design - easy peasy.

Stovefitter's Warehouse is owned and managed by Julian Patrick, blogger and author of The Stove Fitter's Manual. Julian was previously a full-time installer of wood-burning stoves (including solid fuel heating systems). He laid down the tools in 2013 to write his stove manual and open a small shop in North Wales (the Wood Stove Hut, soon to grow into The Stovefitter's Warehouse).

More info about the company and Julian's team here