£1,299.00 (including VAT)
The Heta Inspire 45 is a modern 5kW stove and is manufactured in Denmark. The stove is very solid (thick steel) and has an excellent efficiency rating (84%). Customers particularly like the clean lines and high efficiency.
This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas).
This stove can burn wood in a Smoke Control Area (most towns and cities are Smoke Control Areas)
This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations).
This stove is certified as Ecodesign compliant (has passed the new and stringent 2022 regulations)
Material: Steel with a steel door
Output: 5kW
(max approx: 6.64kW)
Material: Steel with a steel door
Output: 5kW
(max approx: 6.64kW)
Body
Width: 540mm
Height: 555mm
Depth: 377mm
Flue
5" (125mm)
Body
Width: 540mm
Height: 555mm
Depth: 377mm
Flue
5" (125mm)
Premium product
Made in Denmark
Excellent efficiency
Best selling stove
Premium product
Made in Denmark
Excellent efficiency
Best selling stove
Customers tell us that this a great stove. That's good enough for me. It's about time we tested it in our office!
Customers tell us that this a really great stove. That's good enough for me.
Check out the narrower Heta Inspire 40 and wider Heta Inspire 55.
The Heta Inspire 45 is a modern 5kW stove and is manufactured in Denmark. The stove is very solid (thick steel) and has an excellent efficiency rating (84%). Customers particularly like the clean lines and high efficiency.
We did not choose this stove as is usually the case - this stove was chosen by our customers. We added the Heta Inspire to our site following a particularly high demand for quotes for the stove from our customers, despite the fact that it was not on our website - this being a sure sign that a stove is a potential winner :-)
The Heta 45 is amongst our best selling stoves (Winter 2019) and was third most searched for stove when we look at our search statistics.
Customers have a knack of sniffing out the best stoves and are certainly pointing other customers towards the Heta Inspire 45.
Multifuel
Nominal 5kW
Max. 6.64kW
This stove will run happily at 2-6.64kW depending on fuel load.
This stove can burn wood or smokeless fuel without any modification.
This stove meets and exceeds the new 2022 Ecodesign regulations
This stove is approved by DEFRA to burn wood in a Smoke Control Area
84% (as a rough guide 84% of heat goes to the room with 16% going up the chimney).
Don't overthink efficiency. 75%-85% is fine and 90%+ efficiency may not work so well on shorter or difficult chimneys.
Yes, this stove can be fitted with an external air kit (draws air from outside via pipe direct to stove). Usually this option is not relevant unless a room air-vent is required and the property is airtight (by design or choice).
See "Customers Also Bought".
Steel stove (5-year body guarantee) with steel door
What to buy steel or cast-iron? Do not overthink. Steel heats fast. Cast-iron takes a little longer but retains heat longer as fire dies.
Hearth thickness: minimum 12mm non-combustible material (can include floor thickness).
Height: 555mm
Height with log store: 855mm
Width: 540mm
Depth: 377mm
Front of pipe to rear of stove: 180mm
Flue outlet: 5" (125mm)
Which fitting pack for my liner? A fitting pack includes all you need except liner and chimney closure plate (also sometimes known as register plate)? Advice here
Viewing area (from outside stove looking in)
Width: 36cm
Height: 28cm
5" (125mm) collar top or rear (can be installed with a 5" or 6" chimney liner)
Top or rear connection
Distance to combustibles SIDE: 300mm
Distance to combustibles REAR: 150mm
To non-combustibles there are no hard rules but, around the stove, a 50mm minimum air gap is recommended to brick/stone. This to be increased to 100mm for rendered or boarded surfaces. Prior to purchasing any stove download the installation manual to check that manufacturers do not have any additional requirements.
Max log length: 420mm
We offer 14 days from delivery to report any courier damage to your stove. If a stove is damaged by the courier we will replace or refund as desired.
The manufacturer offers a 5 year body guarantee
Why do we sell glass insurance (pre-ticked box close to ADD TO CART button)? Because glass is classed, in the stoves industry, as a consumable item and not covered under ANY guarantee by any manufacture for any reason whatsoever. If it breaks or cracks on day one or day twenty it is not covered. If the inside of the glass goes cloudy or gets any kind of surface coating or etching then it is not covered (it will be to do with what you are burning according to manufacturers and glass makers). Glass usually costs £30-£60 plus postage but can be more on higher end models.
Defra-approved or/and Ecodesign stoves are designed and thoroughly tested before being allowed onto the market and every stove sold is identical. In the rare event a stove does not perform as well as expected it is always down to the installation, the chimney or circumstances unique to the property (pressure imbalances caused by local conditions, down drafts etc.). Here at Stovefitter's we have taken stoves back on a number of occasions for testing on our chimney and in every situation the stoves performed as expected (we may of course find a faulty stove one day but never as yet). We may, at our discretion, take a stove back once it has been used and in this situation a 50% refund would be provided (stove would be sold as second hand). We would, however, offer a 33% refund on a replacement stove.
Already have a chimney? You need 1. Stove 2. Liner 3. Fitting Pack 4. Chimney closure plate (Hardiebacker board from Builder's merchants or galvanised sheet).That's it!
No chimney? Check out our shed kits or let us design your clip-together chimney design - easy peasy.
Stovefitter's Warehouse is owned and managed by Julian Patrick, blogger and author of The Stove Fitter's Manual. Julian was previously a full-time installer of wood-burning stoves (including solid fuel heating systems). He laid down the tools in 2013 to write his stove manual and open a small shop in North Wales (the Wood Stove Hut, soon to grow into The Stovefitter's Warehouse).
